919925034719 919925034719


HEPA Filters


Business Type : Manufacturer, Supplier, Retailer

Product Details

Feature Attractive Design, Heat Resistance, Rust Proof
Finishing Coated
Efficiency 0.3 Micron
Available Efficiencies 75% - 99.99%
Flow Capacity Range 500-1000 cfm
Filtration Grade HEPA Filter

Preferred Buyer From

Location Anywhere in India

V Bank Hepa Filter Featres A Fire Retardant, Water Resistant Glass Fiber Media Housed In A Robust Polystyrene Frame. The Pleats Are Separated With Thermoplastic (hot Melt)separators. The Filter Is Capable To Handle Very High Air Flow Volume At Relatively Low Pressure Drop. Unaffected By Variable Air Flow In System.may Be Operated Up To 500 M3/h And Ineither Air Flow Direction. Mini - Pleat ‘separator-less’ Fileter. High Effciency Micro Fiberglass Medium. Highest Dust Holding Capacity And Long Filter Life. Usage Zone Pharmaceutical Plants, Semi - Conductors, Medical Equipment Biotechnology, Operation Theaters, Food & Beverage, Research & Laboratories.

Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Efficiency 99.997% integral efficiency against 0.3m DOP aerosol challenge
Capacity 130m*/hr
Initial Pressure Drop 250 Pascal
Final Pressure Drop 675 Pascal
Maximum Temp 70oC
Maximum RH 80%

Preferred Buyer From

Location Anywhere in India

Detail :

  • Size: 224mm OD x 169mm ID x 180mm long- Custom Sizes Available
  • Connection: 6 off M5 nut certs equi-spaced on 197 PCD
  • Weight: 1.37Kg


Materials of construction:

  • End Caps: Rigid Black Polyurethane
  • Protective Grids: White powder coated steel
  • Filter Medium: Non-flammable, water repellent, micro fine glass paper
  • Gasket: 10x5mm neoprene seal


Quality Control:

  • ASIANEX HEPA filters are manufactured and tested under strict quality controlled conditions in accordance with ISO 9001-2015 accreditation.
  • Each Filter is individually factory tested.
  • Alternative sizes, specifications and materials of construction may be available; please contact our Sales Office to discuss your specific requirements.
Read More...


Yes! I am interested


Business Type : Manufacturer, Exporter

Product Details

Feature Heat Resistance, Perfect Griping, Rust Proof
Application Used To Filter Particulate 0.3 Micron, With 99.9% Efficiency
Rating 3 Micron or More
Efficiency 90 - 90% - Does Not Allow Moisture/oil To Enter Through
Media Polypropylene, PES, HDPE, Glass Fiber - PTFE Coatings / Laminations Available
Sizes/Types Customized - Flanged Type / Boxtype Depending On Installation Requirement

Preferred Buyer From

Location Anywhere in India

Housing/Frame Size - Gi, Ms,ss304,powder Coated/ Crd Or Zinc Coated 610 Mm X610 Mm X50 Mmhoo/150/300 545 Mm X 545 Mmx 50 Mm /100/150/300- Or As Per Specs

Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Nominal Size 92mm @ x 149mm long
Connection 1” BSP male x 15, 20 or 35mm long
Filter Grade/Efficiency EU 14/H14 99.997% against 0.3um DOP aerosol
Max Differential Pressure 675 Pascal
Max Working Temperature 60°c
Max Working Humidity 80%

Preferred Buyer From

Location Anywhere in India

ASIANEX manufactures an extensive rangeof HEPA filter inserts to meet the stringent requirements of the nuclear, pharmaceutical and biotech industries.

The mini cartridge HEPA filter range comprises of both open ended in bleed and in line cylindrical filter units manufactured with either a stainless steel or plastic body.

Typically these filters are used on process applications associated with the controlled ventilation of small enclosures such as glove boxes & isolators; other applications include drum & tank ventilation.

Details :

  • Filter medium: Non-fiammable, water repellent, microfine glass paper with glass thread spacers formed into a cylindrical element with polyurethane end caps
  • Construction: 316L Grade Stainless Steel, PVC or Polypropylene (110mm @)
  • Rated duty: 5l/secataninitial pressure dropof 175/200 Pascal(openended/in- line)


Each Mini Cartridge HEPA filter is supplied with a plastic end caps fitted to both ends of the cartridge; these should be removed before installation and then fitted to the outgoing dirty filter cartridge before it's removal from the contained area.

Quality Control:

  • ASIANEX BRAND Air Filtration HEPA filters are manufactured and tested under strict quality controlled conditions in accordance with our ISO 9001:2015 accreditation.
  • Each filter is individually factory tested
  • Alternative sizes, specifications and materials of construction may be available; please contact our Sales office to discuss your specific requirements.
Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Efficiency 99.999% integral efficiency against DOP challenge aerosol 99.995% @ MPPS Grade H14 EN1822
Final Pressure Drop <600Pascal
Burst Pressure > 2000 Pascal
MaximumTemp 70°C
Maximum RH 70%
Media Non-flammable, water repellent, microfine glass paper folded over glass thread spacers
End Flanges Rigid Polyurethane
Protective Grid Expanded Flattened Stainless Steel
Handle Stainless Steel
Seal Silicone Rubber

Preferred Buyer From

Location Anywhere in India

AFT MODEL-1

  • Nominal duty: 35 m/hr @ aninitial Ap of 130 Pascal
  • Maximum duty: 60 m*/hr @ an initial Ap of 220 Pascal
  • Nominal size: @146mm x 164mm long Suitable for use in a 150mm bore tube


AFT MODEL-2

  • Nominal duty: 70 m7/hr @ an initial Ap of 130 Pascal
  • Maximum duty: 120m*/hr @ aninitial Ap of 220 Pascal
  • Nominalsize: @196mm x 240mm long Suitable for use in a 200mm bore tube


Quality Control:

  • ASIANEX Air Filtration HEPA filters are manufactured and tested under strict quality controlled conditions in accordance with our ISO 9001-2015 accreditation.
  • Each Filter is individually factory tested and allocated with a unique serial Number for future traceability.
  • Alternative sizes, specifications and materials of construction may be available; please contact our Sales office to discuss your specific requirements.
Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Type Hepa Filters
Color Black, White
Feature Attractive Design, Perfect Griping
Finishing Coated
Shape Round
Grade Standard Pharma Grade

Standard Range

Rated Duty (I/sec) Insert Length (mm) Insert diameter (mm) To suit housing diameter (mm) Approx weight (kg)
12.5 150 131 135 1
35 300 207 210 3
75 375 247 250 4
160 400 326 330 5

Preferred Buyer From

Location Anywhere in India

The push-through filter is primarily intended for use as a supply or exhaust HEPA filter to contained cells such as glove box’s and isolators.

The standard insert comprises a cylindrical filter element, protected by inner and outer steel grids, encapsulated by an open and closed end flange with external sealing rings.

They are replaced by pushing the used insert through its cylindrical housing into the contained cell, for bagging and disposal.

We produce specific designs suitable for either single or two-stage filtration systems.

Technical Specification:

  • Filter Grade-  EU 13 -EU 14/H13-—H14
  • Integral Efficiency - 99.997% - 99.999% BS3928 or 0.3m DOP aerosol
  • Initial pressure drop - 250 Pascal, Dirty pressure drop, $1000 Pascal
  • Max working temp - 70°C, Max working R.H., 90%


Quality Control:

  • ASIANEX BRAND Air Filtration products are designed, manufactured and tested under strict quality controlled conditions and in accordance with our ISO 9001:2015 accreditation. Each HEPA filter wiil be individually tested.
  • Alternative sizes, specifications and materials of construction are available.
  • Please contact this sales office to discuss your specific requirement and for further information on these products.


Materials of Construction:

  • Filter Media: Non-flammable, water repellant, microfine glass paper with glass thread spacers
  • Case Flanges: Rigid Polyurethane
  • Support Grilles: White painted mild steel or stainless steel
  • Sealing Rings: Mechanically sealed silicone rubber lip-seals 3 mm thick
Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Material Stainless Steel
Sealant Polyurethane
Filter Grade/ Efficiency H14 99.995 @ MPPS (99.999% DOP)
Rated Duty 10 Vsec
Clean Pressure Drop 220 Pascal
Max Dirty Pressure Drop 600 Pascal
Max Working Temperature 60°C
Max Working Humidity 80%

Preferred Buyer From

Location Anywhere in India

ASIANEX manufactures an extensive range of HEPA filter inserts to meet the stringent requirements of the nuclear, pharmaceutical and biotech industries.

The Pharma Grade Venting HEPA filter can be manufactured in a range of lengths from 50mm to 200mm to suit differing air flow / pressure drop requirements.

Typically these filters are used on process applications associated with the controlled ventilation of small enclosures such as glove boxes & isolators; other applications include drum & tank ventilation.

Details :

  • Size: 120mm OD x 150mm long Fitted with a 1"BSP male parallel thread x35mm long End caps & retaining grids: 304L Grade Stainless Steel
  • Filter medium: Non-flammable, water repellent, micro fine glass paper with glass spacers formed into a cylindrical element


Quality Control:

  • ASIANEX HEPA filters are manufactured and tested under strict quality controlled conditions in accordance with our BS EN ISO 9001:2008 accreditation.
  • Eachfilteris individually factory tested
  • Alternative sizes, specifications and materials of construction may be available; please contact our Sales office to discuss your specific requirements.
Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Grade Standard Pharma Grade
Minimum Integral Efficiency 99.997% in accordance with BS 3928
Clean Pressure Drop 280 Pascal when vented to atmosphere
Maximum Dirty Pressure Drop $1000 Pascal
Burst Pressure 23000 Pascal
Standard Range 75, 160, 280, 470 & 950 I/sec 7

Preferred Buyer From

Location Anywhere in India

ASIANEX manufactures an extensive range of HEPA filter inserts to meet the stringent requirements of the nuclear, pharmaceutical and biotech industries.

We manufacture Pharma grade plug-in HEPA inserts in a range of standard sizes and from various material combinations.

Materials of Construction:

  • End caps & seal rings: Vacuum formed polypropylene with nylon inserts, pressed carbon steel with a high temperature corrosion resistant paint finish or stainless steel
  • Retaining grids: Perforated polypropylene, expanded steel with a high temperature corrosion resistant paint finish or stainless steel.
  • Filter medium: Non-flammable, water repellant, microfine glass paper formed into a lose pleat annulus with bonded glass thread spacers to provide positive pleat separation.
  • Bond: Media pack and protective grids are sealed to the end caps with polyurethane or high temperature cement.
  • Gasket: Internal mechanically sealed silicone rubber lip seal 3mm thick.
Read More...


Yes! I am interested


Business Type : Manufacturer, Supplier, Retailer

Product Details

Feature Attractive Design, Rust Proof
Size 130mm @ x 75mm high (3l/sec} or 150mm high (6 Vsec)
Connection 1” BSP femalethread
Minimum Efficiency 99.99% inaccordance with BS 3928.
Clean Pressure Drop 90 Pascal
Max Dirty Pressure Drop 1000 Pascal Max working temp: 70°C

Preferred Buyer From

Location Anywhere in India

ASIANEX manufactures an extensive range of circular HEPA filter inserts for a wide range of industrial and process applications.

The3&6l/secglove box HEPAfilterhas been designed as an easy to use and cost Effective solutionforthe supply & extract ventilation of glove boxes, isolators, enclosures, tanks and vessels.

ASIANEX will manufacture and works test this filter to suit either commercial or radiological applications. The nuclear grade product conforms to Atomic Energy Standard Specification AESS44/13075.
 
Materials of Construction:

  • End Caps: Rigid Polyurethane with nylon insert
  • Media: Non-flammabie, water repellant microfine glass paper formed into a close pleat annulus with bonded glass thread spacers.
  • Support: Galvanised, powder coated or stainless steel expanded steel gridtoboth faces
  • Seal: Nitrile ‘O' ring


Filter is designed to be screwed onto a 1” BSP male threaded spigat with a sealing face diameter of between 35 & 55mm.

Quality Control:

  • ASIANEX HEPA filters are manufactured and tested under strict quality controlled conditions in accordance with our ISO 9001:2015 accreditation.
  • Each filter is individually factory tested
  • Alternative sizes, specifications and materials of construction may be available; please contact our Sales office to discuss your specificrequirements.
Read More...


Yes! I am interested


EU-13 & EU-14 Push-Push HEPA Filter
Get Best Price

Business Type : Manufacturer, Supplier, Retailer

Product Details

Material Stainless Steel
Feature Attractive Design, Rust Proof
Finishing Coated
Handle Material Plastic
Shape Cylindrical
Filtration Grade HEPA Filter

Preferred Buyer From

Location Anywhere in India

ASIANEX BRAND - PUSH PUSH CYLINDERICAL HEPA Filter is the new technology one step ahead in the containment for safe change during the process. This filter is covered with SS 316 frame along with Polypropylene flaps from Top and bottom along with Silicon food grade gasket to maintain the integrity of the filter inside the housing. These are available also along with housing in Stainless Steel 316 L.

Read More...


Yes! I am interested


EU-13 & EU-14 Cartridge HEPA Filter
Get Best Price

Business Type : Manufacturer, Supplier, Retailer

Product Details

Material Stainless Steel
Feature Attractive Design, Perfect Griping, Rust Proof
Finishing Coated
Filtration Grade HEPA Filter
Shape Cylindrical
EU-13 Efficiency -99.997%
EU-14 Efficiency - 99.999%

Preferred Buyer From

Location Anywhere in India

Yes! I am interested